Rail Pressure?

Just took my first run with the Xzilleraider 2 (stacked with BDTD CL).

Adjusting the levels and watching the RP I'm seeing anywhere from 17-18k (CL alone) to 21-22 k (CL + QZ LVL 5) crusing at 80.

So the question is, how much is too much (short term & steady 4-7 hour runs) for stock injectors?

BTW max WOT was around 26-27k. Of course this makes sense as the (stack) race tune on the QZ sets a max at 27.5k.

Also, is the max RP set at 27.5 for the normal race?

Thanks

 

Do you have a modied pump or is it stock? What does RP do if your tuner is on lower levels, I wouldn't run the tuner much over stock if just normal driving for hours. Those # are about right, even at wot, just would like to know if you have a stock pump or not

 

Thanks, wasnt sure. Been running the CL for a while without any idea of the RP. Happy to hear I'm in specs.

RP is running around 650-700 at idle w/wo CL. havent taken iyt all the way down but had it (BDTD) on performance and still was running around 16-17k at 80.

As far as the pump goes I've still got the stock CP3 with a 30psi AD100.

Havnt decided if it runs better with the QZ stack (pressure only) or with the regular tune with timimg.

Only had the regular tune on it for 1 day before I loaded the stack but first impressions feel like it doesnt seem to have as much oomph with pressure only.

 

thats prob cuz of the stock pump,