Hit the dyno. Smarty rocks.
Hit the dyno. Smarty rocks.
Well last sat. I finaly got to hit the dyno. I was very impressed with the resaults. I just have the mods that are in my sig. I was running the smarty tnt tune. The first 2 runs I was at level 7, tq4, timing defualt, rp3. First run was 498hp, second run was 499hp. Didn't seem to drain the rail held at about 22.5-23k lp down to 4 psi. I realy wanted to make it over 500hp so for the last run I loaded lv.9, tq4,timing default and rp4 and put down 518hp. Not sure of the tourqe numbers I have to figure out the cd they gave me of the runs. On the same not My best 1/4mile was 13.47 @100mph I had a post with my slips and vid. on it some where I'll try to find it. Its deff time for a bigger turbo egts are getting a bit toasty. Let me know what you all think.
Awesome numbers, that stock turbo must have been singing up around 45-50 psi boost! Did you dyno your truck in stock format with intake, exhaust, and tranny mods to see what you gained with the Smarty? Did you get more that 230HP gain?
Guest
Posts: n/a
Trending Topics
Dang, i did 476 on TNT SW #7 and same settings but my timing was on 2, so timing set on default netted u 22hp more and jumpin up to SW#9 netted 42hp more. I even turned on the TST on 2/0 to get 488hp and tried 3/1 and lost power.
A buddy of mine dynoed 465hp on TNT SW#9 with same settings.
Seems a bit high to me but hey im no expert here, those are great #'s for just the Smarty and stock everything else except tranny.
A buddy of mine dynoed 465hp on TNT SW#9 with same settings.
Seems a bit high to me but hey im no expert here, those are great #'s for just the Smarty and stock everything else except tranny.
Thread
Thread Starter
Forum
Replies
Last Post
Trooperthorn
1st Gen. Ram - All Topics
12
Jun 9, 2014 10:53 PM
DodgeCTD
3rd Gen High Performance and Accessories (5.9L Only)
22
Jun 21, 2008 09:39 AM
Billm2004
3rd Gen High Performance and Accessories (5.9L Only)
38
May 15, 2008 06:24 PM
PourinDiesel
3rd Gen High Performance and Accessories (5.9L Only)
11
Aug 13, 2006 12:33 AM



