looking to buy an industrial injection phat shaft turbo what size do you think i need to get a good power gain and lower the egts.

phatshaft 62, 64, or 66 and what size exhaust 12cm or 14cm all three are the same price.

also do i need any boost fooler even tho i have a smarty and how about a down pipe is my stock one ok or do i need to get one also.

thanks guys.

everything i got is in my sig.

 

if you tow alot a 62 would be good. I think you may like the 64/12 too. It will spool faster than the 14 but you will lose a little on top because of the smaller housing.

 

i dont do any towing its just a driver

 

You still have the stocker with Smarty and 120hp injectors?

I would think a 64/14 would be a nice set up. Still good spool compared to a 66 but enough air to keep it cool. I'm bettin that with a 62/12 you'd be pretty toasty by the end of the 1/4.

 

yea im thinkin the 64/14 is what im gonna do thanks guys

 

I have a Htt 62/12 and It's not cooling enough since the TST. I love the fast spool but now I need to stepup to a 14/71 after just four months!
Get the 64 with a 14 housing! I think those Injectors will get it flowing.

 

thanks sounds good. probly order it up when i get home just gotta check some funds, im sure most of you know how that is.

 

now im tossin up the super phatshaft compared to the regular phatshaft either or will be a 64/14 any owners have any imput out there id appreciate it if you think its worth the extra 325 for the SPS