Been ordering parts for a six inch intake but ran into a delay and can't find an aluminum 6" to 5" aluminum bell reducer. Schedule 10 preferably. Any ideas appreciated.

 

I bought one somewhere and had the shortcut on my computer but its gone now . I will see if I can find it again somewhere

 

That would be great. Iv looked and looked but all I can find is aluminized but that wont work. Has to be aluminum. Thanks!

 

can you just use a silicone hose reducer instead???
I cant find any aluminum reducers

 

Im going from aluminum into a 5" rubber elbow already and another rubber reducer would probably give too much flex.

 

use a steel reducer and just paint it or powdercoat it???
or do you need to weld them??

 

Im welding them. Im taking the your whistler idea with my own twist. 6" aluminum elbow into the 5" factory turbo elbow. I bought a 4" to 6" rubber elbow for the turbo but it will not fit because of the oil filter so I am going another route so a 6" to 5" reducer is needed for factory boot.

 

http://store.airflo.com/

or maybe www.iowa80.com

not sure, but its worth a shot

 

[QUOTE=WUnderwood;1911867]http://store.airflo.com/

thats the place right there I got mine from. thats what I used in the intake setup I have and it works pretty well. I have it on my truck and its still daily driven right now but I hope not for long