Anyone installed the EMS kit on their 4x4? Curious on the ease of install and quality.

MikeyB

 

post a link so we know what your talkin about.

 

Link to their website.. http://www.emsoffroad.com/

MikeyB

 

Don't know about these guys. But, I know the Dynatrac kit is a nice setup. I've used their kit on my Jeep. I'm planning on it for my current truck.

 

The EMS kit is cheaper than the Dynatrac kit, but is this a case of "You get what you pay for"?

 

The reason for looking at the EMS kit is they have one for a dually.
Dynatrac doesn't have a kit yet for duallies because of the hub extension.
Unless a hub extension from a Chevy or pre '99 Ford will work on a Dodge?

My dad is planning to buy a '07 MC dually 4x4 and wants it part time, just like his Superduty.

MikeyB

 

I looked around on Ebay earlier but didn't see one of the Dana 60 kits. What are they asking for them? Just a thought, but you might check and see if the outer knuckle off of an early 90's Ford will match up to a late model Dodge inner C. If so you could pick that whole assembly up for a decent price. Would just have to figure something out on the ABS sensor. I'm fairly certain they have the same size balljoints.

 

So any real world experience with the EMS kits from anyone???

 

I have know eric from EMS for a few years, When we competed, He built a friends jeep from a bare frame up. Great customer service and product's. definatly a stand up guy. I would not hesitate to buy from him.

Marc

 

I was debating on getting the EMS kit but i figured i better go with the proven dynatrac system. EMS's kit is brand new, personally if there was something wrong with it and i needed to tear the front axle apart that would be a big problem with my personal budget..