Well it looks to me like Westach is the one and only source of a 0-30 psi electric fuel pressure analog gauge. Have I overlooked anything? I can't find anything else escept mechanical, 0-15, or 0-100.

 

Doug,

How is the neck - hope everything is healing well.

I have the Westach 0 - 30 fuel pres. gauge setup. I wish I had gone with the 0 - 16 unit. I have the 600 Cummins and most of the time the gauge just sits at 9/10. If you go WOT in a high RPM situation such as off the line, it will drop to 3/4. From what I have read here on the forums, I am right on the edge with 3 to 4 PSI.

Now if you want to run the fass system or some other fuel pres. booster, then the 30 PSI gauge is the way to go.

Just my 2 cents,

Fred

 

autometer makes one thats electric is about $200 unless you go to ebay or used.

 

thanks for the good comments guys. Neck seems to be healing well, all the original pain is gone (just normal recovery stuff), so its obvious to me that they made the nerve in there happier. I'm still under doc's restrictions not to lift anything heavier than a beer can . and I don't even drink


So Autometer makes a 0-30 electric? tell me which one - Did I overlook somthing on their website?

 

autometer phantom series
0-15psi electric