Ok, I have a question about this setup. It says in the advertisement easy 10 minute setup. Am I correct in assuming that this is only for the actuall box? Does the monitor require all of the gauge type hookups like drilling and tapping the exhaust manifold for the EGT's? Just wondering how much work is actually required to hook this up?

Thanks

Hondo

 

Yes you still need to drill the manifold, for the pyro.

Other than that its really about 10min.

 

Installation is pretty easy. It will take more than 10 minutes by the time you drill and tap the manifold for the probe and fish the Attitude cable and mount it, but the install is straight forward and can be done in the driveway.