dyno graphs 06 mega cab
#1
Registered User
Thread Starter
Join Date: Nov 2005
Location: Vancouver BC
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
dyno graphs 06 mega cab
hi all, I would like to post three graphs , but don't know how to , could somebody do this for me ? all I need is one's e-mail adress so I can send you an e-mail withh the pictures
irekm@telus.net
irekm@telus.net
#6
Registered User
Thread Starter
Join Date: Nov 2005
Location: Vancouver BC
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
We dynoed it in direct drive , yes I was surprised when I saw this graphs myself , but this how this truck feels like freight train ( even with this modest power ) , it just keeps on pulling . To bad that graphs start so late in rpm range , Not bad for not fully broken in truck ,with just quadzilla xzt on winter diesel.
#7
so what hp will this truck make i stock form, you say you have a chip if i read right
nice numbers tho, always thought peak hp and tq came at a lower rpm than the max
nice numbers tho, always thought peak hp and tq came at a lower rpm than the max
Originally Posted by eric64
We dynoed it in direct drive , yes I was surprised when I saw this graphs myself , but this how this truck feels like freight train ( even with this modest power ) , it just keeps on pulling . To bad that graphs start so late in rpm range , Not bad for not fully broken in truck ,with just quadzilla xzt on winter diesel.
Trending Topics
#9
On the street the curve would look different to an extent. I am positive the torque would be lower. Remember that on a dynoe, even most load dynos the truck still has to spool before it makes power. Almost all dyno graphs will appear to haev horsepower and torque at higher rpm's than expected because of this. The exception to this is if you do a step down test which most people do not even know how to perform.
#10
Registered User
Thread Starter
Join Date: Nov 2005
Location: Vancouver BC
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by qzilla
On the street the curve would look different to an extent. I am positive the torque would be lower. Remember that on a dynoe, even most load dynos the truck still has to spool before it makes power. Almost all dyno graphs will appear to haev horsepower and torque at higher rpm's than expected because of this. The exception to this is if you do a step down test which most people do not even know how to perform.
2550 rpm for max power , I would call lower in rpm range than expected not higher , But I might be mistaken
Thread
Thread Starter
Forum
Replies
Last Post
jimbo486
3rd Gen Engine and Drivetrain -> 2003-2007
13
11-05-2009 09:17 AM
Battering Ram
3rd Gen High Performance and Accessories (5.9L Only)
37
02-11-2004 01:45 AM