DriveShaft Loops
Registered User
Joined: Aug 2004
Posts: 3,697
Likes: 1
From: Houston, TX
I have not seen any 3rd gens with drive shaft loops yet personally. Mostly 2nd gen or tailer trucks.
Here are a couple of threads with info and pics for loops.
https://www.dieseltruckresource.com/...ve+shaft+loops
https://www.dieseltruckresource.com/...ighlight=loops
Here are a couple of threads with info and pics for loops.
https://www.dieseltruckresource.com/...ve+shaft+loops
https://www.dieseltruckresource.com/...ighlight=loops
Registered User
Joined: Nov 2005
Posts: 7,785
Likes: 3
From: Pattonville, Texas
So what are the rules for this season?
Rear U-joint of rear shaft, middle of rear shaft, front U-joint of front shaft?
I'm considering designing & fabricating a set for the '05 at the shop.
Rear U-joint of rear shaft, middle of rear shaft, front U-joint of front shaft?
I'm considering designing & fabricating a set for the '05 at the shop.
Registered User
Joined: Aug 2004
Posts: 3,697
Likes: 1
From: Houston, TX
This is the DHRA Sled Pulling rules for 2007. It does specify the requirement. Just search for "drive shaft" in the pdf.
http://www.dhraonline.com/main/forms...ook-v2.7.1.pdf
http://www.dhraonline.com/main/forms...ook-v2.7.1.pdf
Thread
Thread Starter
Forum
Replies
Last Post