My SRT-10 pillar arrived today and I thought I'd use it to mount my Attitude. About a month ago I requested a mount from Bullydog, and much to my surprise, they sent it to me! Well with it, it included a plate that "plugs" into the 2 1/16" gauge hole. I used a rubber band around the plug, to get a good tight fit. Then I trimmed the plate so that it wouldn't show. I then used a little Velcro to stick the Attitude to the plate, and voila! My EGT gauge also came in today. That's going to be my "back-up" if I ever have to take it in. I've got some pics here, tell me what you think! It's very sturdy and it's easier to see then down in the ashtray.

Have a good one,
Nick

 

I think it looks fine Also a question for you??? will the autometer work ok with the same probe as the juice???

 

Yeah it should work. I got just the gauge, used from a guy on e-bay. I'm going to need to devise a way to hook the gauge quickly and easily if I ever get stranded on the side of the road, and need the juice/attitude off, pronto. Call me paranoid, but I'd pull the juice off and plug the gauge in. I'll have to get an extension for the wire that is hooked up to the thermocouple that came with the attitude, but that should be about it. So does anyone know where I could get 2-3' of the thermocouple wire?

Thanks,
Nick