Qzilla, whats the difference between the 03-04 & o4.5-07 modules? cause i seen when i ordered mine that there was seperate #'s for my 04' then newer trucks?

 

They changed from the 305 hp engine to the 325 hp engine but I don't know if that makes a difference or not.

 

i knew the engine HP difference, i just hoped it would be a sure thing i got the right one for my truck, and not the 325hp trucks...

 

You can check the part# when you get it and you can also download the X2Info application off of our website and check the model number the board was programmed with to make certain!

 

Larry, I ordered the one you specified when you ordered from us. Yours will be for a 03-04 Dodge

 

i have mine installed,with boost fooling enabled.

if i could quit gassing it, i might actually see some mileage gains.

seems to make the truck much more....perky...

greg

 

So, on the 06 version, does it include boost fooling?
I see on the site that it can upgrade to X2....does that work or matter with an 06 version?
Thanks

 

The way we ship them out, they DO NOT do boost fooling. If you want it you can download it for free off the site.

Now, if you need more than 32psi you are not driving for economy, so that has us shaking our heads a little but, we had tons of requests for it and so we put it out there.

You can upgrade it to the X2 XZT module however it is not the same exact X2 XZT since the wiring harness is different. You get the same tuning and you can download the same files but, it does not have the newer style harness that eliminates tapping for the Commander and will not have the ability to have cold engine protection without the Commander.

 

Thanks Q.
I saw that after actually sitting down and reading all 19 pages...
Thanks again.

 

So when I upgrade to X2 will I get a new harness that I can switch on the fly or will I have to remove the box and reprogram it? Also will I have to Tap any wires? I may want to just buy the X2 (possibly with the Commander) if this isn't an easy swap/upgrade.

Kevin

 

thanks man, so when do u think i should see it, a week or so? iam in no big hurry.

 

Update on my front: I ran without the box for a tank, and looks like my mileage is right at 13.5. There's nothing wrong with my truck, as it gets great mileage on the freeway, but the traffic around here has become worse since Labor Day. Can't do anything about it.

In short, I think my baseline was wrong and the box did provide a possible 0.5+ MPG gain. I also liked the small amount of added spunk it provided. So it's going back on today.

Quad, you said it can go on with a Rokktech sensor with no loss of efficiency?

 

I spoke too soon!! UPS just brought mine....so, now i see it say to to put the module inside the cab, whys that? if all the connections are underhood..

 

Still waiting for mine, and I ordered four weeks ago......

 

Well after 2 months I got mine I'll keep you updated I go through a tank a week.