3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!

Any Guesses on What I'll Dyno?

Thread Tools
 
Search this Thread
 
Old Apr 26, 2009 | 10:59 AM
  #1  
Jason_K's Avatar
Thread Starter
Registered User
 
Joined: Jun 2006
Posts: 761
Likes: 0
From: Central Pennsylvania
Any Guesses on What I'll Dyno?

i'm hitting the dyno in a few weeks and was wondering what you all think i'll put down. i'm gonna dyno with everything in my sig

thanks
Reply
Old Apr 26, 2009 | 12:40 PM
  #2  
mattfolsom's Avatar
Banned
 
Joined: Mar 2007
Posts: 192
Likes: 0
From: Sacramento CA
I would guess close to 600, we had about the same setup on an 05 but with twins and snow water meth and it did 656 last July good luck man
Reply
Old Apr 26, 2009 | 04:12 PM
  #3  
Bswope's Avatar
Registered User
 
Joined: Jan 2006
Posts: 1,589
Likes: 0
From: McConnellsburg, PA
Jason id say your gonna be right around 600 dude!! Good luck man, ill be waiting to hear how ya make out!!
Reply
Old Apr 26, 2009 | 04:17 PM
  #4  
MoNStrRIg's Avatar
Registered User
 
Joined: May 2008
Posts: 186
Likes: 0
From: Camp Lejeune
yeah, id say around 600hp and between 1100-1200 torque. Nice ride....
Reply
Old Apr 26, 2009 | 04:33 PM
  #5  
DodgeCTD's Avatar
Registered User
 
Joined: Dec 2005
Posts: 373
Likes: 0
From: Ocean Springs,Ms
I'd say around 570-580. I only did 521 with twins and stock injectors/cp3, But you got injectors so you should be considerably higher. Good luck with it!
Reply
Old Apr 26, 2009 | 04:38 PM
  #6  
JFlory's Avatar
Registered User
 
Joined: Feb 2008
Posts: 331
Likes: 0
From: Baldwin, Kansas
Gonna push that 62 hard to make 600, but it might do it. Good luck and post up what you make. Got almost the exact setup on my '03.
Reply
Old Apr 26, 2009 | 04:57 PM
  #7  
one54ton's Avatar
Registered User
 
Joined: Aug 2005
Posts: 771
Likes: 0
From: L-town, NOR*CALi
right at 600
Reply
Old Apr 26, 2009 | 06:59 PM
  #8  
Jason_K's Avatar
Thread Starter
Registered User
 
Joined: Jun 2006
Posts: 761
Likes: 0
From: Central Pennsylvania
thanks for the reply guys, i'm hoping for 600 but i don't know if the ol' 62's got it in her. i'll be sure to post up my results.

i actually had the turbo off today because i blew the gasket between the turbo and exhaust manifold. if i would have blown that gasket two weeks ago i would have upgraded to the 64/71/13. however, as luck would have it, i bought a new gun a couple weeks ago and that didn't leave me any money to upgrade the turbo

i'm sure the 64 would get me 600
Reply
Old Apr 26, 2009 | 07:50 PM
  #9  
megacabdad's Avatar
Registered User
 
Joined: Jul 2008
Posts: 2,731
Likes: 0
From: Erie, PA
I'll guess 581/1062...

Where are you getting on the rollers at?
Reply
Old Apr 26, 2009 | 07:53 PM
  #10  
JFlory's Avatar
Registered User
 
Joined: Feb 2008
Posts: 331
Likes: 0
From: Baldwin, Kansas
Watched the 64/13/71 make 650 yesturday with your exact setup, same injectors, FASS, Smarty TNT. Only difference was it had a stage 3 Floor it pump and was an auto.

J.D.
Reply
Old Apr 26, 2009 | 08:22 PM
  #11  
Bswope's Avatar
Registered User
 
Joined: Jan 2006
Posts: 1,589
Likes: 0
From: McConnellsburg, PA
Originally Posted by Jason_K
thanks for the reply guys, i'm hoping for 600 but i don't know if the ol' 62's got it in her. i'll be sure to post up my results.

i actually had the turbo off today because i blew the gasket between the turbo and exhaust manifold. if i would have blown that gasket two weeks ago i would have upgraded to the 64/71/13. however, as luck would have it, i bought a new gun a couple weeks ago and that didn't leave me any money to upgrade the turbo

i'm sure the 64 would get me 600
What gun did ya buy Jason?? I know.. I know im nosy....
Reply
Old Apr 26, 2009 | 10:07 PM
  #12  
'strokeThis_'07's Avatar
Registered User
 
Joined: Dec 2006
Posts: 677
Likes: 0
From: Green River, WY
Im gonna say 570-580. Obviously depends on what settings you run...lvl. 3 aint gonna do it
Reply
Old Apr 27, 2009 | 07:16 AM
  #13  
Jason_K's Avatar
Thread Starter
Registered User
 
Joined: Jun 2006
Posts: 761
Likes: 0
From: Central Pennsylvania
Originally Posted by megacabdad
I'll guess 581/1062...

Where are you getting on the rollers at?
sarver automotive in sarver,pa is having a dyno day on May 16th and will continue on may 17th if needed. they had their first dyno day last fall and had 30 or so trucks hit the rollers. it ought to be a good time

Originally Posted by JFlory
Watched the 64/13/71 make 650 yesturday with your exact setup, same injectors, FASS, Smarty TNT. Only difference was it had a stage 3 Floor it pump and was an auto.
J.D.
that pretty dang impressive right there do you know how much you're making me want that turbo now?


Originally Posted by Bswope
What gun did ya buy Jason?? I know.. I know im nosy....
you're funny buddy, i bought a springfield armory xd .40 subcompact. with all the crazy people running around killing people nowadays i decided that i wasn't going to be a statistic (or at the very least i'm going down with a fight). this little fella is only 6.25"" long and is pretty easy to conceal.
Originally Posted by 'strokeThis_'07
Im gonna say 570-580. Obviously depends on what settings you run...lvl. 3 aint gonna do it
level 3 wont do it?? dang it....i guess i'll have to push the old girl then
Reply
Old Apr 27, 2009 | 07:53 PM
  #14  
megacabdad's Avatar
Registered User
 
Joined: Jul 2008
Posts: 2,731
Likes: 0
From: Erie, PA
Cool...

I'm going to try to make it down there.
Reply
Old Apr 27, 2009 | 10:31 PM
  #15  
'strokeThis_'07's Avatar
Registered User
 
Joined: Dec 2006
Posts: 677
Likes: 0
From: Green River, WY
Originally Posted by Jason_K
level 3 wont do it?? dang it....i guess i'll have to push the old girl then
Well I thought of that as I was typing. Rarely (if ever) on these "how much power should I be making" threads, have I seen someone ask what setting a guy is running. I guess everybody assumes theyve got it cranked up. But maybe a guy has it turned down a bit to see what his "tow tune" makes, ya know?? Just a thought
Reply



All times are GMT -5. The time now is 07:21 AM.