Ok, I am about to add 2 more guages (a drive pressure and mechanical oil pressure) to my current set up and I am not real sure where I want them. I will try and get up a pic of my current set up to help yall help me. The 2 guage steering columb pod would work but I wouldnt mind takin my rail guage off of my A pillar. I also thought about gettin another isspro boost guage and puting it in my A pillar in place of my FP guage so I could watch the boost and Driver pressure side by side.

Another thing to is, to me the oil pressure isnt something that needs to be easily visible like boost, or RP, but I would like to have it in there for safety.

Also, where dose the mechanical oil guage hook into out motors at? Difficult install?

Thanks for any help.

Here is a link to what my current guage set up looks like now.

https://www.dieseltruckresource.com/...hp?photo=26956

 

The only way I can think of is the way I have mine mounted which would be on the dash right to the right of your TST. I used a piece of 1/4"x1" aluminum, drilled and tapped and mounted autometer cup gauge holders. I think you saw them in my pics about the water/meth setup. I still need to hookup my drive pressure gauge from Mike.... nice setup he has... not expensive either...