Another FASS question...
05-15-2007, 03:29 PM
#1
Registered User
Thread Starter
Join Date: Jul 2005
Location: Lloydminster, Alberta
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
Another FASS question...
Is it possible to use the 2 micron filter that the GDP kit uses with the FASS 95 series? The filter I'm asking about is the Fleetgaurd FF5320, which is shown as being a 2 micron filter and on the FASS website they only show a 3 micron filter for the 150 system.
Thanks
Thanks
05-18-2007, 03:58 PM
#2
Registered User
Join Date: Sep 2003
Location: Plano, TX
Posts: 2,534
Likes: 0
Received 0 Likes
on
0 Posts
Yes....if its plumbed on to the Pressure side of the pump........
05-18-2007, 04:58 PM
#3
Registered User
Join Date: Feb 2006
Location: Pearland, TX
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
I did
I did this with my 150 on my last truck.
Hey Diesel Dan,
Since you're reading this post......How can I get an installation kit for my 150 pump? I've emailed a couple of the distributers and I haven't gotten any reply. I now have an 06 and need the mounting bracket and fuel hose and some fittings. My 03 got wrecked so I took off the pump and wire harness. Thanks for any help.
Hey Diesel Dan,
Since you're reading this post......How can I get an installation kit for my 150 pump? I've emailed a couple of the distributers and I haven't gotten any reply. I now have an 06 and need the mounting bracket and fuel hose and some fittings. My 03 got wrecked so I took off the pump and wire harness. Thanks for any help.
Thread
Thread Starter
Forum
Replies
Last Post
snowrodeo
Performance and Accessories 2nd gen only
2
10-09-2006 09:11 AM
Jezzhuntin
General Diesel Discussion
17
08-25-2006 02:51 PM
Flatty
Performance and Accessories 2nd gen only
4
04-25-2005 12:49 PM