Spooler

What are you folks doing to mount the pump up higher than the frame rail? I waisted more than 3 hrs mounting and moving the pump around only to go back to my original position. My filters are hanging lower than I like. About 1 1/2 in. too low. I am still not satisfied where it is.

bigorange

I put mine under the filler neck but had to make my own mounts , I think the mount on the frame under the door is dumb place if you ask me ,,,.

mudder500

Yea I don't like mine like that either. I couldn't get it anywhere else! I'm gonna make a custom bracket and hide it better

ffCTD

Mine is on the outside of the frame. I need to relocate it in the inside here soon. Sooo little room on the inside where I want it.

cgmorgan06

There was someone that did a write up on an Airdog install and if I remember correctly I think that they mounted the pump on a crossmember under the bed.

mudder500

Yea that just makes it closer to the transfer case and driveshafts