3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!

Absolute Best Stack for highest H.P.

Thread Tools
 
Search this Thread
 
Old Oct 18, 2007 | 04:42 AM
  #1  
2whistlers's Avatar
Thread Starter
Registered User
 
Joined: Jan 2005
Posts: 356
Likes: 1
From: Cynthiana, Kentucky
Absolute Best Stack for highest H.P.

For a 2003 Dodge, what is the absolute best high h.p. stack. If different, what is the absolute best for driveability with high h.p.? This truck is completely ready to handle the power, all it needs is tuning. Not only what boxes/programmers, but what settings as well.

This engine has a girdle, fire ringed, 14 mm head studs, HD valvetrain, port & polish, big cam with valve relieved pistons, bored 40 over, 60% injectors, and a BIG set of non wastegated twins.

Already have a few boxes and programmers but want to have the best to start with rather than trying to go back through and switching back and forth. Don't care what it takes, just need absolute power.
Reply
Old Oct 18, 2007 | 04:54 AM
  #2  
CTD03's Avatar
Registered User
 
Joined: Jul 2006
Posts: 485
Likes: 0
From: western,pa
smarty, new tst with pressure timing for highest H.P. stack
Reply
Old Oct 18, 2007 | 06:38 AM
  #3  
tcr's Avatar
tcr
Registered User
 
Joined: Sep 2003
Posts: 3,188
Likes: 0
From: Austin, TX
Morkable had some great #s, 630s I think, w/ small sticks and a stack of some sort.
Reply
Old Oct 18, 2007 | 09:48 AM
  #4  
soulezoo's Avatar
DTR 1st Sergeant
 
Joined: Apr 2007
Posts: 5,530
Likes: 6
From: Applegate, CA
Originally Posted by CTD03
smarty, new tst with pressure timing for highest H.P. stack
X2 on that... could also throw MP-8 into that mix. (triple stack)
Reply
Old Oct 18, 2007 | 09:56 AM
  #5  
rufushusky's Avatar
Registered User
 
Joined: Jul 2007
Posts: 522
Likes: 0
From: Weymouth, MA
Originally Posted by soulezoo
X2 on that... could also throw MP-8 into that mix. (triple stack)
I agree but you would need a LOTS of fuel, big lift pump and CP3(s) and some big olde turbos, not to mention a fully billet trans and some gauges...but you seem to have that idea down. Maybe a custom programmed VA C5 would be good too in time. But for now I think the TST/Smarty/MP8 stack would be the most beat. I have the Ramifier(predecessor to the MP8) and it adds a lot down low! I love it.
Reply
Old Oct 18, 2007 | 10:00 AM
  #6  
soulezoo's Avatar
DTR 1st Sergeant
 
Joined: Apr 2007
Posts: 5,530
Likes: 6
From: Applegate, CA
Originally Posted by rufushusky
I agree but you would need a LOTS of fuel, big lift pump and CP3(s) and some big olde turbos, not to mention a fully billet trans and some gauges...but you seem to have that idea down.
Yup, I think I do!!

Now just need the TST and MP-8! I am holding out now to see what Quad is going to do with the Adrenaline.
Reply
Old Oct 18, 2007 | 10:07 AM
  #7  
jlibert's Avatar
Registered User
 
Joined: Dec 2006
Posts: 842
Likes: 0
From: Fresno, Ca
Originally Posted by soulezoo
Yup, I think I do!!

Now just need the TST and MP-8! I am holding out now to see what Quad is going to do with the Adrenaline.
you could probably do without the mp8 if you can get ahold of the smarty beta program-
Reply
Old Oct 18, 2007 | 10:12 AM
  #8  
soulezoo's Avatar
DTR 1st Sergeant
 
Joined: Apr 2007
Posts: 5,530
Likes: 6
From: Applegate, CA
Originally Posted by jlibert
you could probably do without the mp8 if you can get ahold of the smarty beta program-
Got it! Actually, Beta 4.3 smokes too much down low for me. I can smoke 4.4 too, but is a lot more drivable. Also, while the betas add pressure, it simply raises it dramatically earlier in the powerband; it does not exceed overall stock pressure. You can use mp-8 to add that 2-3k pressure at the top to level everything out...
Reply
Old Oct 18, 2007 | 10:17 AM
  #9  
RyeThomas's Avatar
Winner winner chicken dinner!
 
Joined: Aug 2006
Posts: 1,613
Likes: 11
From: Northern VA
I think after this weekend their will be alot of questions answered as to what works and how well. Alot of trucks are headed to the Fawl Brawl and running on the same dyno with the same weather conditions, so no excuses .
Reply
Old Oct 18, 2007 | 10:24 AM
  #10  
soulezoo's Avatar
DTR 1st Sergeant
 
Joined: Apr 2007
Posts: 5,530
Likes: 6
From: Applegate, CA
Can't wait to hear the results!!
Reply
Old Oct 18, 2007 | 10:31 AM
  #11  
RyeThomas's Avatar
Winner winner chicken dinner!
 
Joined: Aug 2006
Posts: 1,613
Likes: 11
From: Northern VA
Originally Posted by soulezoo
Can't wait to hear the results!!
It should be interesting, with the Van aken c5, new Smarty software, TST, Bully dog software,etc,etc, should be a great event.

I just bought a TST to stack with my Smarty but maybe I should have waited to see the results of the weekend .
Reply
Old Oct 18, 2007 | 10:43 AM
  #12  
rufushusky's Avatar
Registered User
 
Joined: Jul 2007
Posts: 522
Likes: 0
From: Weymouth, MA
Originally Posted by RyeThomas
I just bought a TST to stack with my Smarty but maybe I should have waited to see the results of the weekend .
I dunno that is pretty well establish big power stack. I think it was a wise investment on your part. Of course if you don't want it I'll take it haha
Reply
Old Oct 18, 2007 | 10:48 AM
  #13  
RyeThomas's Avatar
Winner winner chicken dinner!
 
Joined: Aug 2006
Posts: 1,613
Likes: 11
From: Northern VA
Originally Posted by rufushusky
I dunno that is pretty well establish big power stack. I think it was a wise investment on your part. Of course if you don't want it I'll take it haha

Nah its a proven stack so I should be fine, but with my luck it wont work well on my truck. Oh and I cant give it away but their were a few in the classifieds, I got a loaded R49 for a heck of a price.
Reply
Old Oct 18, 2007 | 11:44 AM
  #14  
DMS1707's Avatar
Registered User
 
Joined: Feb 2007
Posts: 130
Likes: 0
From: santa rosa ca.
How much power you want? 800,900,1000hp
Reply
Old Oct 18, 2007 | 12:35 PM
  #15  
soulezoo's Avatar
DTR 1st Sergeant
 
Joined: Apr 2007
Posts: 5,530
Likes: 6
From: Applegate, CA
Originally Posted by DMS1707
How much power you want? 800,900,1000hp
Uh... how about 600+??
Reply



All times are GMT -5. The time now is 03:15 PM.