Who is interested in a 4" lift spindle for a 2wd 2500/3500 Ram from a very well respected suspension lift manufacturer? Retail will probably be $699 to $749.00.

Aloha

 

I wanted those bad when I had a 2x4. I was calling all around to see who makes one.

 

I'd be interested in that. I put the 1-1/2" daystar spacers in, but I still hate the rake! Are you serious? I am.

 

The ball is rolling on this... how quickly it gets to market depends largely on the demand.

Aloha

 

When I had my 2x4, I wanted some badly. One of the main reasons was I like to occasionally drive pretty fast on the freeway. My old truck had 3.73's and 285 tires. I still wanted less RPM. AAM has a 3.54:1 ratio listed in their catalog, but I hear they to not make the ratio.

So fwy speeders need bigger tires.

Good luck.

 

Who is rolling the ball?

 

With a 4" lift does the brake and sensor lines need to be longer?

MikeyB

 

I will chime in on this as well. I would be very interested in this product for my 2WD.

Thanks
Bill

 

I'm not going to answer any product questions yet... I'll save that until the spindles have been installed on a few trucks, tested, and ready to ship. This thread is to help get an idea of realistic production numbers. I'm not building them personally. Nor do I work for the company that is building them. I don't even own a 2wd Ram.

 

how bout a drop spindle???

 

I would be interested in a lift spindle. I looked for something more than the spacers but couldn't find anything

 

A buddy of mine is in the market for one ASAP.. Could he be one of the trials or errors??? What about upper control arms hitting??

 

I'd be more than interested in this!....ASAP!!

I can also leave the truck if someone needs it for prototyping.

 

I'm interested!

 

Is the 2500/3500 diesel front suspension the same?