I have a chance to buy a set of 100 edm nozzles for my 03 for around 450. I currently have a smarty but want to try the nozzles but worry about my mods. I have a carter pusher pump but i hear people sayin i'll have to mod my cp3 if I go over 100hp in nozzles. I don't have the money to do this right now will I be good to run the nozzles as far as draining the rail?? I don't really want to run any lines or mode it right now. Is 450ish to much??

 

you should be alright with just thr nozzles installed, but if you have the smarty on there with your sure to drain your rail.

 

you'll be fine, I am running my rail down but not draining it. TO see maximum hp you will need to mod it sooner or later but don't worry about it. ALot of guys running stock pumps pushing 500hp. Might have to upgarde the fuel system but maybe not. Do you have a turbo or any other things. I would be more worried about the egts getting hot but I think you'll get by all right. Go ahead and fill out your signature and welcome to the site, alot of info goes down here.