10,000 FTLB of Torque in the Southwest
Thread Starter
Chapter President
Joined: Apr 2007
Posts: 9,375
Likes: 7
From: misplaced Idahoan stuck in Albuquerque, Roughneckin on RIG 270
10,000 FTLB of Torque in the Southwest
Well the day is over and I am BEAT!! We had a great turnout and raised $630 for Families of Fallen Soldiers! Had 21 trucks on the rollers and nearly 30 showed up to support.
Special Thanks to:
LAZARSMITH (Made trophies and Lazarlights, Drive PSI kit, Lazarbucks)
High Desert Ravelco (donated a Ravelco)
Performance Flat Four (provided the facility)
Pureflow Technologies (donated an Airdog)
Mac tools (hats and t-shirts)
RECON (shirts and stickers)
Boogerwelds.com (created the flyers)
Zangara Dodge (donated 5 oil changes)
Jessie the DJ (2 tickets to tonights MMA fight) (good luck with your fight Jessie)
LINE-X of Albuquerque
Black Out Diesel Performance (donated a 6" billet stack clamp)
I ended up putting my beast on the rollers too.
pull #1 smarty on level 3 version 4.11 405.1 hp & 816.2 tq
pull #2 Smarty on Level 5 same version 394.7 hp & 859.2 Tq
pull #3 Smarty on level 5 same version 389.3 hp & 845.3 tq
Here is a link to the photo bucket album since there are 77 pics of just what I took. We are going to assemble a video and the pics on disc for the contestants.
http://s207.photobucket.com/albums/b...%20dyno%20day/
Diesel Power Magazine also showed up and ended up being there ALL DAY! They also did a photo shoot on a buddies truck while he was there so I can't wait to see that one too!
THANKS AGAIN FOR EVERYONE WHO HELPED OUT AND DONATED TO THE CAUSE! The money goes to helping with travel costs to get families of fallen soldiers to the Albuquerque Memorial to receive the recognition and thanks for their Loss of a National Hero!
THANK YOU AGAIN AND GOD BLESS!!
Special Thanks to:
LAZARSMITH (Made trophies and Lazarlights, Drive PSI kit, Lazarbucks)
High Desert Ravelco (donated a Ravelco)
Performance Flat Four (provided the facility)
Pureflow Technologies (donated an Airdog)
Mac tools (hats and t-shirts)
RECON (shirts and stickers)
Boogerwelds.com (created the flyers)
Zangara Dodge (donated 5 oil changes)
Jessie the DJ (2 tickets to tonights MMA fight) (good luck with your fight Jessie)
LINE-X of Albuquerque
Black Out Diesel Performance (donated a 6" billet stack clamp)
I ended up putting my beast on the rollers too.
pull #1 smarty on level 3 version 4.11 405.1 hp & 816.2 tq
pull #2 Smarty on Level 5 same version 394.7 hp & 859.2 Tq
pull #3 Smarty on level 5 same version 389.3 hp & 845.3 tq
Here is a link to the photo bucket album since there are 77 pics of just what I took. We are going to assemble a video and the pics on disc for the contestants.
http://s207.photobucket.com/albums/b...%20dyno%20day/
Diesel Power Magazine also showed up and ended up being there ALL DAY! They also did a photo shoot on a buddies truck while he was there so I can't wait to see that one too!
THANKS AGAIN FOR EVERYONE WHO HELPED OUT AND DONATED TO THE CAUSE! The money goes to helping with travel costs to get families of fallen soldiers to the Albuquerque Memorial to receive the recognition and thanks for their Loss of a National Hero!
THANK YOU AGAIN AND GOD BLESS!!
Chris, a big thanks goes to you for setting the show up-that was a blast! Oh, by the way, where are your horsepower #s in your post?
Just giving you a hard time, since I got the low torque #s for the day-gonna have to install that DIY TC lockup switch and try it again at a lower RPM next time!
It was also good to see all the different trucks out there, and put faces to names of people here on DTR and elsewhere.
Just giving you a hard time, since I got the low torque #s for the day-gonna have to install that DIY TC lockup switch and try it again at a lower RPM next time!
It was also good to see all the different trucks out there, and put faces to names of people here on DTR and elsewhere.
Cbrahs, I wonder why your truck put out 400+ HP with less torque than level 5 with it on level 3. Then when you switched to level 5 you had less HP than lever 3 but considerably more torque? Me and you basically have similar mods and I run on 5 most of the time, so i was just curious because my truck is probably around the same numbers.
Thread Starter
Chapter President
Joined: Apr 2007
Posts: 9,375
Likes: 7
From: misplaced Idahoan stuck in Albuquerque, Roughneckin on RIG 270
I had a hard time spooling it up on 5. I have version 4.11 and no boost fooling so i think that was the main cause but not fully sure. I wanted to do basically a baseline for future mods. As soon as I get my tranny and the rest of the goodies in I can go TNT and then go for broke! LOL
Trending Topics
Gee well maybe i'm better off on level 3 with my setup but i do notice a power difference from 3 to 5 on my truck but who knows. Not to hi jack the thread but I've been trying the extra timing level 4 (fuel economy setting) and I'm wondering if maybe its too much timing for stock injectors. Ugh I just wish I could afford a silverbullet and new injectors tips right now and a clutch and be done with it.
Here is a myspace link for some pics my boy's took at the event. I hope this link works. http://www.myspace.com/varghesegeorge
Thread Starter
Chapter President
Joined: Apr 2007
Posts: 9,375
Likes: 7
From: misplaced Idahoan stuck in Albuquerque, Roughneckin on RIG 270
Gee well maybe i'm better off on level 3 with my setup but i do notice a power difference from 3 to 5 on my truck but who knows. Not to hi jack the thread but I've been trying the extra timing level 4 (fuel economy setting) and I'm wondering if maybe its too much timing for stock injectors. Ugh I just wish I could afford a silverbullet and new injectors tips right now and a clutch and be done with it.
Thread Starter
Chapter President
Joined: Apr 2007
Posts: 9,375
Likes: 7
From: misplaced Idahoan stuck in Albuquerque, Roughneckin on RIG 270
Here is a myspace link for some pics my boy's took at the event. I hope this link works. http://www.myspace.com/varghesegeorge
can you mail me a CD of the pics taken? I would like to assemble a CD of pics and any videos that were taken.
Thanks for coming up!
snoyes- THANK YOU TO ALL THE MILITARY MEMBERS AND TO THE VETERANS!! WE APPRECIATE WHAT YOU ALL DO!!
Just let me know were to send them or were to post them for ya. I think a CD like that would be an awesome idea!


