3rd Gen Engine and Drivetrain -> 2007 and up 6.7 liter Engine and Drivetrain discussion only. PLEASE, NO HIGH PERFORMANCE DISCUSSION!

P0131 code cel on then off

Thread Tools
 
Search this Thread
 
Old Jun 17, 2008 | 12:55 PM
  #1  
stllost's Avatar
Thread Starter
Registered User
 
Joined: Sep 2005
Posts: 64
Likes: 0
From: Uintah Basin Utah
P0131 code cel on then off

Have a 40' toyhauler going out to the lake using e-brake cel came on. code shows P0131. O2 circuit low voltage (bank 1, sensor 1). Load value 55.69, engine coolant temp 204.8, manifold pressure 28.05, rpm 950, speed 28mph, intake air temp 181.4, throttle position 29.41%, time since start 875 sec, control module voltage 13.75, air temp 104. checked code at the lake and then after weekend pulled the trailer home. The cel went off. hooked up code reader information above. Question is I'm heading off for vacation this weekend, will I be ok pulling the 5th wheel 500 miles round trip. Can't get truck into dealer here for at least 3 weeks. Don't want to be stuck on the side of the road, and i really don't think a 02 sensor would be a problem but hope it isn't leading to anything else.
Any input would be appreciatied
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Diesel-Dan
12 Valve Engine and Drivetrain
20
Sep 22, 2019 09:34 PM
longhauler
3rd Gen Engine and Drivetrain -> 2007 and up
15
Jul 5, 2010 06:50 PM
MrSuzuki
3rd Gen Engine and Drivetrain -> 2007 and up
4
Jun 16, 2009 12:23 AM
boaterman
3rd Gen Engine and Drivetrain -> 2007 and up
12
Oct 15, 2008 10:44 AM
Hillbilly Delux
3rd Gen High Performance and Accessories (5.9L Only)
3
Mar 20, 2008 05:01 PM




All times are GMT -5. The time now is 04:15 AM.