I need a couple of part numbers...pinion related
I need a couple of part numbers...pinion related
I found my rear pinion seal has started to leak. I also noticed on my last trip that there was an intermittent vibration under load. What I know I need is the rear pinion seal part number and I probably will need a pinion bearing...part number. I will check for play back there today. I figure since its time to service the rear diff I should make sure there isn't a problem in there at the same time.
The truck is an 07 3500 dually 4x4.
Thanks
Suggestions where to source this would be nice. Sometimes the dealer is good...sometimes...not so good.
The truck is an 07 3500 dually 4x4.
Thanks
Suggestions where to source this would be nice. Sometimes the dealer is good...sometimes...not so good.
Pinion seal number is 26064030
Pinion nut number is 40003027
Crush Sleeve number is 12471647
Outer bearing cup number is NP926068
Inner bearing cup number is HM807010
Outer bearing number is NP457992
Inner bearing number is HM807046
Pinion nut number is 40003027
Crush Sleeve number is 12471647
Outer bearing cup number is NP926068
Inner bearing cup number is HM807010
Outer bearing number is NP457992
Inner bearing number is HM807046
Thread
Thread Starter
Forum
Replies
Last Post
Diesbull
3rd Generation Ram - Non Drivetrain - All Years
3
Jul 14, 2008 05:19 PM
Texaschevelle
3rd Gen Engine and Drivetrain -> 2003-2007
1
Oct 7, 2007 10:08 AM
DART505
Performance and Accessories 2nd gen only
4
Jul 29, 2007 05:03 PM



