3rd Gen Engine and Drivetrain -> 2007 and up 6.7 liter Engine and Drivetrain discussion only. PLEASE, NO HIGH PERFORMANCE DISCUSSION!

HELP engine knock and shakes really bad

Old Nov 17, 2008 | 07:09 AM
  #1  
CTD03's Avatar
Thread Starter
Registered User
 
Joined: Jul 2006
Posts: 485
Likes: 0
From: western,pa
HELP engine knock and shakes really bad

over the weekend i just finished up with valves and put every thing back together and when i started truck i had a bad knock going on and was getting ready to shut it down and then i had a bad shake so whats going on

are the valves out of adjustment or do i have the injectors harness hooked up wrong.

i am going back at it Tuesday around 6pm so i hope some one can help me out thanks
Reply
Old Nov 17, 2008 | 07:14 AM
  #2  
Dodgezilla's Avatar
Registered User
 
Joined: Aug 2002
Posts: 8,803
Likes: 0
From: Northern Virginia
You are in the 6.7 section. You should move this to the correct forum..

I think it sounds like an injector issue. Make sure everything is buttoned up nice and tight.
Reply
Old Nov 17, 2008 | 07:51 AM
  #3  
CTD03's Avatar
Thread Starter
Registered User
 
Joined: Jul 2006
Posts: 485
Likes: 0
From: western,pa
THANKS dang i didn't pay attention hope they move it for me thanks

yes i am going to take my tst off the truck any ways


please remove from this section i posted it up in 03 section thank you very much
Reply
Old Nov 17, 2008 | 10:09 AM
  #4  
coolbreeze's Avatar
Registered User
 
Joined: Jul 2007
Posts: 367
Likes: 0
From: Redding, Ca
You may be in the right place. Sounds like you need a new truck. Good luck.
Reply
Old Nov 17, 2008 | 02:28 PM
  #5  
CTD03's Avatar
Thread Starter
Registered User
 
Joined: Jul 2006
Posts: 485
Likes: 0
From: western,pa
Admins Can you please move this to 03-07 5.9 so more people can look over this thanks
Reply
Old Nov 17, 2008 | 07:32 PM
  #6  
manganos's Avatar
Registered User
 
Joined: Jul 2004
Posts: 246
Likes: 0
From: Dinwiddie, VA
Assuming you put everything back together ok it sounds as if you have air in the injectors/lines. Try bleeding the injectors.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Zee
1st Gen. Ram - All Topics
25
Mar 23, 2010 09:54 PM
HappyGA
3rd Gen Engine and Drivetrain -> 2003-2007
15
Oct 16, 2006 08:21 AM
Hoss
3rd Gen Engine and Drivetrain -> 2003-2007
30
Oct 3, 2006 02:57 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 06:56 PM.