3rd Gen Engine and Drivetrain -> 2007 and up 6.7 liter Engine and Drivetrain discussion only. PLEASE, NO HIGH PERFORMANCE DISCUSSION!

6.7 chips/programmers

Thread Tools
 
Search this Thread
 
Old Oct 2, 2007 | 02:02 PM
  #1  
KMKDiesel's Avatar
Thread Starter
Banned
 
Joined: Jul 2007
Posts: 425
Likes: 0
From: Montpelier, Idaho
6.7 chips/programmers

What set up do you guys have and have any of you tried stacking chips on the 6.7 yet. Tomorrow I will have mine stacked with edge juice and ts performance mp-8. Do any of you guys have that setup and how do you like it. Thanks
Reply
Old Oct 2, 2007 | 02:36 PM
  #2  
cumminsdriver635's Avatar
Registered User
 
Joined: Dec 2003
Posts: 3,077
Likes: 0
From: Garrard county, Kentucky
Have you pulled with your truck any? Is it an auto or a stick, and if its an auto how does it seem to take the power? Those are good numbers with just an Edge. What does it sound like straight piped, and how did you get around the particulate filter sensors?

Eric
Reply
Old Oct 2, 2007 | 04:13 PM
  #3  
KMKDiesel's Avatar
Thread Starter
Banned
 
Joined: Jul 2007
Posts: 425
Likes: 0
From: Montpelier, Idaho
I have pulled my camper and it pulls real nice, and smooth I have the manuel tranny. Straight piped it sounds ok not anything like the 5.9 it is real quiet. It has a deep sound in lower rpms and a ricey rap out sound at 3000 rpms. The sensors have thrown a few codes and detuned the motor, I am still waiting for some one to fiqure it out. I was real impressed on the dyno, since I have added alot more and I want to wait tell the trucks not detuned anymore to dyno again.
Reply
Old Oct 3, 2007 | 05:48 PM
  #4  
KMKDiesel's Avatar
Thread Starter
Banned
 
Joined: Jul 2007
Posts: 425
Likes: 0
From: Montpelier, Idaho
Well just got the mp-8 hooked up stacked with my edge and holy s&^% it made a huge difference for power the combo works really good together and it puts out some pretty good smoke too
Reply
Old Oct 4, 2007 | 08:13 AM
  #5  
MtnTrucker's Avatar
Registered User
 
Joined: Jun 2007
Posts: 220
Likes: 0
From: Franktown, CO
I'm curious, your signature says you have a Snow Performance Stage 3 Silencer ring. I checked their website and couldn't find anything like that for a 6.7. Do they make one that works with the VGT turbo? Whats the part number for it? How does it work and how does it sound?
Reply
Old Oct 4, 2007 | 11:17 AM
  #6  
n0ne's Avatar
Registered User
 
Joined: Mar 2004
Posts: 262
Likes: 0
mtn trucker... He needs to put a comma in his signature.. what he meant to say is that he has a Snow Performane Stage 3 water meth kit, and that his Silencer ring is removed from the turbo.. The silencer ring is something the manufacturer puts in to make the turbo whistle a little bit quiter.
Reply
Old Oct 4, 2007 | 01:19 PM
  #7  
KMKDiesel's Avatar
Thread Starter
Banned
 
Joined: Jul 2007
Posts: 425
Likes: 0
From: Montpelier, Idaho
Sorry about that I will get that fixed
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BaconGrainFarms
Performance and Accessories 2nd gen only
8
Jan 6, 2012 03:44 PM
sakisaki400
3rd Generation Ram - Non Drivetrain - All Years
10
Nov 5, 2009 01:24 PM
newman187
3rd Gen High Performance and Accessories (5.9L Only)
5
Aug 7, 2008 02:13 AM
saint
3rd Gen High Performance and Accessories (5.9L Only)
0
Feb 11, 2005 10:33 PM




All times are GMT -5. The time now is 08:03 AM.