put the goerend tc in my truck yesterday, to go along with the hts vb. WOW, what a differenc this stuff makes!
Anybody wanna sea write up?

 

Yes, please!

 

whats a tc goerend?

 

goerend= its the brand(company)
tc= torque converter
vb= valve body

 

I just ordered my HTS vb and it should be here tuesday,

 

you guys pull your tranny out yourselves or do u get a shop to do it?

 

do you know which wires to connect the vba to on a 2006?

 

I did my vb on my 03 myself, no need to pull tranny just the pan for that, but to do the tq you need to pull the tranny, I will do my 07 vb my self when it gets here

 

sorry for the hasty question i just posted, its just that im a little frustrated because i have been trying to figure out where to wire in the valve body assistant for like 2.5 hrs and i need to use the truck real soon..

p.s. the instructions that came with it are faulty..they say to tap into a wire in pin 18 of the 50 pin connector on the pcm but pin 18 is empty so i am lost.

 

Dang dude I wish I could help, never done that before, you should start a new thread under HELP and someone might be able to figure it out?

 

thanx...i tried posting in help but no response yet..

 

TA-DA



http://www.pirate4x4.com/forum/showthread.php?t=645388

hope this helps.

 

Hey 35xj, how much HP do you estimate your truck puts out? I'm thinking of building my Trany too and would prefer doing just the VB and TC myself as you did. I'm guessing that I won't add more than 150 hp with the mods I have now and in the future.
Bob