Ultra low sulfur info direct from Cummins
This low sulfur stuff just does not make since to me. The purpose is to lower emmisions right? From what I have been reading (on the net and in mags.) Fuel economy will be affected in a negative way. So if you drive 10,000 miles and average 19mpg it will take about 555 gallons.Now subtract 2.5mpg from your previous 19mpg and you get 16.5mpg and if you drive 10,000 miles and average 16.5mpg you will need to burn about 606 gallons of fuel. Thats 51 extra gallons of fuel in the atmosphere! So the oil industry will have to process an extra 50 gallons, trucks delivering fuel to fuel stations will have to make more trips to keep the pumps full and the fuel companys have to go through the process of taking out sulfur. All of those things listed will have to pollute more in order to compliment the new fuel. The Goverment does not care about pollution, they just want to steal your money and make more laws!!

I guess this doesn't sound all that bad to me. The Chevron info said it was only on the order of 1% reduction in BTU's. That's not very much. It also said that the process to remove the sulfur also removed some of the aromatics (garbage) in fuel, resulting in a higher cetane number. That's not bad at all.
Sulfur has no use in the fuel, it's the process of sulfur removal that strips the lube out of the fuel.They just want the sulfur out so the new pollution devices don't clog up on the newer trucks coming, and the new pollution devices are what drop the mileage on the trucks, not the lack of sulfur. If the refiners put enough lube back in the fuel after the sulfur removal process is the big question, I'll just keep using my additive for now.
I guess this doesn't sound all that bad to me. The Chevron info said it was only on the order of 1% reduction in BTU's. That's not very much. It also said that the process to remove the sulfur also removed some of the aromatics (garbage) in fuel, resulting in a higher cetane number. That's not bad at all.
I got our dealer (motorcycle) gas tank filled yesterday and I asked the driver about ULS and was told by him all the fuel being delivered is now ultra low sulfur even if the pumps don't state it. He said the low sulfur is being colored for off road use only. This is in Florida, don't know about other states.
Does anybody know if there is a possible reason why Fuel Pressure would increase some by using the ULSD?
My fuel pressure has increased about 1.5-2 psi to about 9psi at idle now. I am still on my stock lift pump. No other changes that I can think of that would cause an "increase".
I did just change my fuel filter today, but it didn't really seem to make any difference. My FP has been reading higher for about the past 3 weeks to a month or so. Not complaining...just curious.
My fuel pressure has increased about 1.5-2 psi to about 9psi at idle now. I am still on my stock lift pump. No other changes that I can think of that would cause an "increase".
I did just change my fuel filter today, but it didn't really seem to make any difference. My FP has been reading higher for about the past 3 weeks to a month or so. Not complaining...just curious.
I have a family member who delivers fuel, he tells me that the lub is added automaticly by a computer when he fills the tanker with Diesel. So what ever the computer adds is what we get.
I just hope the computer is not run by Windows 98, 98 SE, ME, 2000, XP or anything else made by Microsoft (Blue Screen of Death = Ctrl, Alt, Delete = restart) who knows what we may get mixed in with our diesel fuel.
If ULSD has only 1% less BTU output then why do I lose 2.5 mpg now that it is here and has been for a while? BTW it's not due to winter blend that is not here yet.
I just hope the computer is not run by Windows 98, 98 SE, ME, 2000, XP or anything else made by Microsoft (Blue Screen of Death = Ctrl, Alt, Delete = restart) who knows what we may get mixed in with our diesel fuel.
If ULSD has only 1% less BTU output then why do I lose 2.5 mpg now that it is here and has been for a while? BTW it's not due to winter blend that is not here yet.
More on this subject:
"A deadline affecting how diesel fuel is mixed is looming and may cost users a lot of money in fines.
Don Francis, certified energy specialist with Cenex, said the 1990 Clean Air Act establishes certain diesel criteria affecting the use of sulfur that must be in place by June 1, 2007. By that time, diesel for off-road use in service stations or by dealers must have a sulfur content down to 500 parts per million. Onroad diesel fuel must be ultra-low sulfur — down to 15 parts per million by Oct. 15 at retail levels."
"When the sulfur content of diesel is lowered, he said, the product becomes very dry and has less lubricating ability. Refineries have to add lubricants and detergents to the fuel to prevent engine problems, such as plugged up injectors, he said.
Using ultra-low sulfur diesel has been in effect in Europe for a number of years, he said, and scientists have learned a little about it because of that.
Francis warned using lower than premium brand diesel may damage an engine. He said No. 2 diesel may not have a fuel additive package and urged diesel-users to stay with major brands.
“A lot of people don’t know about this and it is creeping up on them,” he said."
Full article: http://www.enidnews.com/business/loc...yword=topstory
"A deadline affecting how diesel fuel is mixed is looming and may cost users a lot of money in fines.
Don Francis, certified energy specialist with Cenex, said the 1990 Clean Air Act establishes certain diesel criteria affecting the use of sulfur that must be in place by June 1, 2007. By that time, diesel for off-road use in service stations or by dealers must have a sulfur content down to 500 parts per million. Onroad diesel fuel must be ultra-low sulfur — down to 15 parts per million by Oct. 15 at retail levels."
"When the sulfur content of diesel is lowered, he said, the product becomes very dry and has less lubricating ability. Refineries have to add lubricants and detergents to the fuel to prevent engine problems, such as plugged up injectors, he said.
Using ultra-low sulfur diesel has been in effect in Europe for a number of years, he said, and scientists have learned a little about it because of that.
Francis warned using lower than premium brand diesel may damage an engine. He said No. 2 diesel may not have a fuel additive package and urged diesel-users to stay with major brands.
“A lot of people don’t know about this and it is creeping up on them,” he said."
Full article: http://www.enidnews.com/business/loc...yword=topstory
I don't mean to hop off topic here but I have a quick question to ask.
At my local Shell station they have 2 choices for diesel, regular ol #2 and a Premium option, what's they difference between the two?
At my local Shell station they have 2 choices for diesel, regular ol #2 and a Premium option, what's they difference between the two?
On average, what's the price difference?
ShaneCTD600,
Our fuel comes out of the pipline from the Twin Cities, we are the first tank farm on the line going south in IA. So I would think that you have it up their, but maybe the station you buy from is still selling normal LSD.
Several places here have yet to update there pumps to show ULSD. I think it is a CYA by not changeing it over until 1/01/07
My $0.02
Our fuel comes out of the pipline from the Twin Cities, we are the first tank farm on the line going south in IA. So I would think that you have it up their, but maybe the station you buy from is still selling normal LSD.
Several places here have yet to update there pumps to show ULSD. I think it is a CYA by not changeing it over until 1/01/07
My $0.02
Does anybody know if there is a possible reason why Fuel Pressure would increase some by using the ULSD?
My fuel pressure has increased about 1.5-2 psi to about 9psi at idle now. I am still on my stock lift pump. No other changes that I can think of that would cause an "increase".
I did just change my fuel filter today, but it didn't really seem to make any difference. My FP has been reading higher for about the past 3 weeks to a month or so. Not complaining...just curious.
My fuel pressure has increased about 1.5-2 psi to about 9psi at idle now. I am still on my stock lift pump. No other changes that I can think of that would cause an "increase".
I did just change my fuel filter today, but it didn't really seem to make any difference. My FP has been reading higher for about the past 3 weeks to a month or so. Not complaining...just curious.


