Thinking about adding a fuel pressure and trans temp gauge
Thread Starter
Registered User
Joined: Jan 2003
Posts: 141
Likes: 0
From: North Alabama
Thinking about adding a fuel pressure and trans temp gauge
Truck is stock, runs good have 53,000 miles on it. Thinking the first mod would be a fuel pressure gauge, like this one from Geno's-
Z SERIES - 2" ELECTRIC FUEL PRESSURE GAUGE 0-30PSI
Where do i mount the sending unit for pressure reading? If someone has some pictures that would be great.
Next i want to mount a transmission temp gauge and would like to mount the
ACU TEMP ADAPTER Would like to see some pics of it also.
Don't want to take the lines apart. And use this temp gauge ULTRALITE II SERIES - 2" TEMPERATURE GAUGE 100°-260. This is not much of mods, but a start. Not sure when i will get to do this because we are in a moving phase.
Input on this setup would be great.
Ordered this truck new
Z SERIES - 2" ELECTRIC FUEL PRESSURE GAUGE 0-30PSI
Where do i mount the sending unit for pressure reading? If someone has some pictures that would be great.
Next i want to mount a transmission temp gauge and would like to mount the
ACU TEMP ADAPTER Would like to see some pics of it also.
Don't want to take the lines apart. And use this temp gauge ULTRALITE II SERIES - 2" TEMPERATURE GAUGE 100°-260. This is not much of mods, but a start. Not sure when i will get to do this because we are in a moving phase.
Input on this setup would be great.
Ordered this truck new
Thread
Thread Starter
Forum
Replies
Last Post
dahla
24 Valve Engine and Drivetrain
10
Jan 28, 2011 09:34 PM
mjbarr99
3rd Gen High Performance and Accessories (5.9L Only)
3
Feb 19, 2009 02:50 PM
live wire
24 Valve Engine and Drivetrain
1
Jul 21, 2003 07:26 AM