Is there a DIY on 3rd gen ball joint replacement?
#1
Registered User
Thread Starter
Join Date: Nov 2007
Location: Alberta Canada
Posts: 2,028
Likes: 0
Received 0 Likes
on
0 Posts
Is there a DIY on 3rd gen ball joint replacement?
Is there a DIY on 3rd gen ball joint replacement anywhere? Also has any1 changed uppers themselves and if so how did u turn the ball joint with the offset?
#2
Sure
the ball jooints in a 3rd gen are easy to replace I got the adjustable upper balljoints normal lower, new hubs, tie rod ends, brake rotors and pads and ujounts did the whole front end in a weekend just took it in for alignment today now she solid, oh and by the way I am 17 years old me and a school buddy did it all in 19 hours
Hemi_on
Hemi_on
#3
Registered User
the ball jooints in a 3rd gen are easy to replace I got the adjustable upper balljoints normal lower, new hubs, tie rod ends, brake rotors and pads and ujounts did the whole front end in a weekend just took it in for alignment today now she solid, oh and by the way I am 17 years old me and a school buddy did it all in 19 hours
Hemi_on
Hemi_on
Thread
Thread Starter
Forum
Replies
Last Post
72dart
3rd Gen Engine and Drivetrain -> 2003-2007
3
06-19-2012 10:42 PM
wcbcruzer
2nd Gen. Dodge Ram - No Drivetrain
22
04-30-2008 06:58 PM
FDC
24 Valve Engine and Drivetrain
2
07-16-2007 12:51 PM
Treangen
3rd Gen Engine and Drivetrain -> 2003-2007
4
05-07-2007 03:10 PM
subspd
3rd Gen High Performance and Accessories (5.9L Only)
3
08-27-2006 02:17 PM