srw rear dics brake help
06-11-2017, 07:49 PM
#1
Registered User
Thread Starter
srw rear disc brake help
hi to 3rd gen forum, im needing a spec from your rear axle for my 1st gen, ive got 2 piston calipers im modding to the d70, and im looking for the clearance measurement between the inner caliper bracket and inner rotor, im less than 1/8", I made a adapter to mount against d70 flange and late caliper bracket, and have 3/8" space between rotor shield and rotor, excessive, ebrake is sitting deep in drum, I think 3/16" to 1/4" would be appropriate, but would really like a confirmation before I cut too much material off, thanks in advance for anyone throwing down underside time, I REALLY appreciate help.
Thread
Thread Starter
Forum
Replies
Last Post
MikeRP
3rd Generation Ram - Non Drivetrain - All Years
79
11-21-2016 10:19 PM
slickr1
3rd Gen High Performance and Accessories (5.9L Only)
3
09-10-2010 08:15 PM
rcts
1st Gen. Ram - All Topics
2
11-21-2009 11:29 AM
dragginlx
2nd Gen. Dodge Ram - No Drivetrain
15
03-09-2007 11:32 AM
Wolfeman
Performance and Accessories 2nd gen only
4
03-08-2007 02:17 AM
