3rd Gen Engine and Drivetrain -> 2003-2007 5.9 liter Engine and drivetrain discussion only. PLEASE, NO HIGH PERFORMANCE DISCUSSION!

Soft Codes

Old Aug 23, 2006 | 02:28 PM
  #1  
v12xke's Avatar
Thread Starter
Registered User
 
Joined: Jan 2004
Posts: 53
Likes: 0
From: Houston, TX
Soft Codes

How long does it take (or # of key cycles) for soft codes that are set to disappear? My engine light never came on, but I have 3 codes that have been there for about 2 weeks. Nothing major, but I thought they went away after a while? Thanks.
Reply
Old Aug 23, 2006 | 05:57 PM
  #2  
RamWheelsBy4's Avatar
Registered User
 
Joined: Aug 2004
Posts: 3,697
Likes: 1
From: Houston, TX
What are the codes, some codes are set and will not clear even with normal scanners (p0633, etc.). They are stored data codes.
Reply
Old Aug 25, 2006 | 12:47 PM
  #3  
v12xke's Avatar
Thread Starter
Registered User
 
Joined: Jan 2004
Posts: 53
Likes: 0
From: Houston, TX
P2269
P0652
P0069

I reversed one of the connections while installing a Quad Std.
Found my mistake and all is well, but I was hoping the codes would go away on their own.
Reply
Old Aug 25, 2006 | 01:13 PM
  #4  
RamWheelsBy4's Avatar
Registered User
 
Joined: Aug 2004
Posts: 3,697
Likes: 1
From: Houston, TX
P2269 Generic Water in Fuel Condition - Might want to drain the fuel filter canister to see if there is water.

P0652 Generic Sensor Reference Voltage B Circuit Low - Don't know right off.

P0069 Generic MAP - Barometric Pressure Correlation - This was probably set while installing Quad.

All should go away after enough start/run sequences as long as what caused the DTC is now corrected.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
exwrestler
3rd Gen Engine and Drivetrain -> 2003-2007
5
Feb 5, 2010 09:34 AM
sallyman1
3rd Gen High Performance and Accessories (5.9L Only)
4
Aug 26, 2008 06:20 PM
mbenedict
HELP!
2
Jul 21, 2007 09:19 PM
JoeDiesel
Performance and Accessories 2nd gen only
5
Dec 24, 2002 01:26 PM
93w250
HELP!
3
Dec 8, 2002 08:00 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 05:34 AM.