Small valve cover breather hose broke :(
Thread Starter
Registered User
Joined: Jan 2006
Posts: 318
Likes: 0
From: Denver CO
Small valve cover breather hose broke :(
Need some help here folks.
Was adjusting the valves on a buddy's truck. In the process I broke the small vent hose attached to the valve cover. I don't think it's under pressure so I'm wondering if I can just 2 part epoxy it back together?
I traced it and it goes down to the block.
Any input would be great!
Thanks!
Was adjusting the valves on a buddy's truck. In the process I broke the small vent hose attached to the valve cover. I don't think it's under pressure so I'm wondering if I can just 2 part epoxy it back together?
I traced it and it goes down to the block.
Any input would be great!
Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
bishgeo
3rd Gen Engine and Drivetrain -> 2003-2007
2
Jul 25, 2010 01:21 PM
sallyman1
3rd Gen Engine and Drivetrain -> 2003-2007
4
Feb 8, 2009 11:35 AM
05ChainSmoker
3rd Gen High Performance and Accessories (5.9L Only)
7
Jul 20, 2008 10:20 PM
signature600
Performance and Accessories 2nd gen only
11
Nov 25, 2007 01:28 PM