Got a question to toss out.... I'm replacing the rocker box gasket. Got 100k on the motor and it's been leaking/weeping since about 10k so it's time. Does anyone know the TORQUE spec on those bolts that hold the rocker box to the cyc. head???? I think since I'll be in there I'm also going to check the valve clearance. Thanks for any help out there!!!

 

The rocker box bolts get torqued to 18ft.lbs (24Nm). You'll have to remove the injector harnesses as well. They get torqued to 13in.lbs (1.5Nm).