I've read that there is a procedure for retrieving codes without a scanner but cant find a description of the procedure. I take it that it involves turning the key off/on in some sequence. Would someone be good enough to refer me to the procedure or post it here?

TIA,
Bruce

 

to look at codes on the newer dodges you have to turn the key from off to on 3 times and then on the third time hold in on position. Do all this without turning over truck. If any codes are stored they will come up and then read **Done**.

 

THANKS!

Bruce

 

And once you look them up, here is a list of most of the codes.

https://www.dieseltruckresource.com/...n&onlynewfaq=1

Hope that helps!

 

Thanks, I very much apreciate it!

Bruce