Receiving 3 Error Codes
#1
Registered User
Thread Starter
Join Date: Jul 2007
Location: La Vernia, Texas
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Receiving 3 Error Codes
I am getting a P2509, P0700, & P0562. I have not noticed any problem with the truck. Seems to start and run fine. I have a code reader so I reset all the codes and they came back, not immediately but after a couple of starts and stops. I am still under warranty but wanted to get an idea of what the problem might be before taking it in to the dealer.
#2
Registered User
Join Date: Apr 2009
Location: Washington
Posts: 346
Likes: 0
Received 0 Likes
on
0 Posts
I kept getting P2509 and the truck would quit after running for about a mile on real cold days. I replaced my batteries and it went away. I guess this is quite common and I hope this helps.
#3
My truck has been throwing P2509 of and on for months. Also if the radio was already on when starting the engine in cold weather the radio would have no sound when the truck started. The batteries are only 9 months old and the terminals are clean. I think I just found the problem. I checked the ground by the left side battery. The lug that the ground bolt goes into, was covered with paint and the bolt was dull where it contacted the wires. I scrapped the paint and bolted it up. We'll see.
Thread
Thread Starter
Forum
Replies
Last Post
sallyman1
3rd Gen High Performance and Accessories (5.9L Only)
4
08-26-2008 06:20 PM
JMalone
3rd Generation Ram - Non Drivetrain - All Years
8
04-03-2007 01:20 PM