3rd Gen Engine and Drivetrain -> 2003-2007 5.9 liter Engine and drivetrain discussion only. PLEASE, NO HIGH PERFORMANCE DISCUSSION!

Receiving 3 Error Codes

Thread Tools
 
Search this Thread
 
Old 04-19-2012, 11:22 AM
  #1  
Registered User
Thread Starter
 
dd5087's Avatar
 
Join Date: Jul 2007
Location: La Vernia, Texas
Posts: 33
Likes: 0
Received 0 Likes on 0 Posts
Receiving 3 Error Codes

I am getting a P2509, P0700, & P0562. I have not noticed any problem with the truck. Seems to start and run fine. I have a code reader so I reset all the codes and they came back, not immediately but after a couple of starts and stops. I am still under warranty but wanted to get an idea of what the problem might be before taking it in to the dealer.
Old 04-19-2012, 11:28 AM
  #2  
Registered User
 
justen920's Avatar
 
Join Date: Apr 2009
Location: Washington
Posts: 346
Likes: 0
Received 0 Likes on 0 Posts
I kept getting P2509 and the truck would quit after running for about a mile on real cold days. I replaced my batteries and it went away. I guess this is quite common and I hope this helps.
Old 04-20-2012, 12:09 PM
  #3  
Registered User
 
TedT's Avatar
 
Join Date: May 2007
Posts: 129
Likes: 0
Received 0 Likes on 0 Posts
My truck has been throwing P2509 of and on for months. Also if the radio was already on when starting the engine in cold weather the radio would have no sound when the truck started. The batteries are only 9 months old and the terminals are clean. I think I just found the problem. I checked the ground by the left side battery. The lug that the ground bolt goes into, was covered with paint and the bolt was dull where it contacted the wires. I scrapped the paint and bolted it up. We'll see.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Dodgeitorramit
24 Valve Engine and Drivetrain
2
11-17-2012 09:54 PM
sallyman1
3rd Gen High Performance and Accessories (5.9L Only)
4
08-26-2008 06:20 PM
mbenedict
HELP!
2
07-21-2007 09:19 PM
D2 Cat
General Diesel Discussion
22
05-06-2007 08:30 AM
JMalone
3rd Generation Ram - Non Drivetrain - All Years
8
04-03-2007 01:20 PM



Quick Reply: Receiving 3 Error Codes



All times are GMT -5. The time now is 03:08 PM.