Just curious:

How many miles did your truck have on it when you picked it new up at the dealers?

Also, if you checked the run time meter, how much time did the time meter have on it when you picked it up?


Thanks!

DT.

 

Mine had 40 some miles on it when I picked it up. But I test drove it starting at 29 miles and put the ones inbetween on it. They had to put a few miles on it running down to the gas station to fill it up. I dont know how many hours where on it. I asked the service manager abought checking that and he said he would have to hook it up to the scaner. Is there a way to check it with out the scaner?

 

Mine had 26 miles and 2 hours on the engine meter.

 

Mine had 14, I do believe.

 

Ahh,engine meter??

Is this an option??

 

About 90 miles.Mine had been on their lot about 9 months.Was such a BIG discount I didn't give it a second thought.I put 30 or so on it WHEN I test drove it.

 

400k and I did not check the hour meter.

 

hum....how do you check the hour meter?

 

If my memory is correct you turn the key on but do not start the engine. Press and hold the trip meter for a few seconds (seems like quite a while) then the display will read engine hours.

Brian

 

yep that's how you do it.

when I first test drove my truck it had 6 miles on it, the hour meter read less than 1 hour but I don't remember the exact number.

 

54 miles didn't know (at the time) it had an hour meter, learned that one later, here.

 

MINE HAD 7 MILES

 

I had 11 miles and 4 hours on it.
Mine was an ordered truck so It didnt have any test drive miles on her.

 

A big 4 miles but 5 hours on the meter?....

 

Is this available on the 2nd Gen. trucks too?