3rd Gen Engine and Drivetrain -> 2003-2007 5.9 liter Engine and drivetrain discussion only. PLEASE, NO HIGH PERFORMANCE DISCUSSION!

Oil dip stick

Old Sep 4, 2007 | 11:04 PM
  #1  
BuckeyeRed's Avatar
Thread Starter
Registered User
 
Joined: Oct 2006
Posts: 89
Likes: 0
Oil dip stick

I need a new oil stick for my 04, anyone know where I can get one besides a Dodge dealer?
Reply
Old Sep 4, 2007 | 11:22 PM
  #2  
wreedCTD's Avatar
Registered User
 
Joined: Dec 2006
Posts: 1,945
Likes: 0
From: cypress/houston, tx
cummins dealer?
Reply
Old Sep 4, 2007 | 11:36 PM
  #3  
BuckeyeRed's Avatar
Thread Starter
Registered User
 
Joined: Oct 2006
Posts: 89
Likes: 0
Originally Posted by wreedCTD
cummins dealer?
I meant online but, thanks for the tip
Reply
Old Sep 4, 2007 | 11:56 PM
  #4  
annabelle's Avatar
Banned
 
Joined: Oct 2006
Posts: 2,613
Likes: 2
From: NM
Same here. The dealer broke mine, and then covered it up.
Reply
Old Sep 5, 2007 | 12:00 AM
  #5  
BuckeyeRed's Avatar
Thread Starter
Registered User
 
Joined: Oct 2006
Posts: 89
Likes: 0
I snapped off the handle of mine (w/ the stick still stuck in tube ) While installing my AFE Blade Runner intake manifold this afternoon.
Reply
Old Sep 5, 2007 | 12:13 AM
  #6  
wintersucks's Avatar
Registered User
 
Joined: Jul 2007
Posts: 19
Likes: 0
Originally Posted by BuckeyeRed
I snapped off the handle of mine (w/ the stick still stuck in tube ) While installing my AFE Blade Runner intake manifold this afternoon.
Thats the identical thing i did a few weeks ago installing my ats intake. grabbed a drill and a very small bit for a pilot hole then grabbed a screw worked great to get it back out. as for a new dip stick just run to the dodge dealer and get one, it was $10. i would be surprised if you can get one shipped to you for a total price of less than that.
Reply
Old Sep 5, 2007 | 12:15 AM
  #7  
annabelle's Avatar
Banned
 
Joined: Oct 2006
Posts: 2,613
Likes: 2
From: NM
Try placing a sheet metal screw into the end. Worked for me. I've gone thru checking two oil changes this way. I drillid a small hole first, and then threaded in the screw. Mine was broken off inside the tube, I used the screw as a handle.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
DODGER BOMBER
HELP!
11
Oct 18, 2007 02:40 PM
MOAGGIE
24 Valve Engine and Drivetrain
4
Jul 25, 2007 07:01 AM
nates90
12 Valve Engine and Drivetrain
1
Dec 4, 2006 11:06 PM
Nimrod
3rd Gen Engine and Drivetrain -> 2003-2007
17
Jan 12, 2004 09:40 AM
dodgediesel4x4
HELP!
31
Dec 18, 2003 08:36 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:05 AM.