Need Help With 2003 Ho

Reply Subscribe

Thread Tools

Search this Thread

Jul 31, 2008 | 01:40 PM

Dodge2003

Thread Starter

Registered User

Joined: Dec 2006

Posts: 17

Likes: 0

Need Help With 2003 Ho

I have a code for 107 and my CEL will not turn off, truck is on limp mode,I replaced the map sensor and massflow sensor and still no change, HELP. also my lamp out light is on and all the bulbs are working.

Jul 31, 2008 | 03:29 PM

MikeyB

Registered User

Joined: Oct 2002

Posts: 7,543

Likes: 4

From: Tomball, Texas

Did you try disconnecting the batteries to clear the ECM? Also check the wire loom holder that is mounted to the valve cover. Look for chaffing.

MikeyB

Jul 31, 2008 | 06:15 PM

Dodge2003

Thread Starter

Registered User

Joined: Dec 2006

Posts: 17

Likes: 0

wire loom?, where is that

Jul 31, 2008 | 08:11 PM

MikeyB

Registered User

Joined: Oct 2002

Posts: 7,543

Likes: 4

From: Tomball, Texas

The wire bundle is running over the top of the injector tubes on the driver side of the engine. Look for a hanger that the wires is being held in place. The wires can chaff in the hanger.

MikeyB