I have a early 2003 s/o with a 47re and 10.5 rear end but I would like to know what type transfer case I have for fliud change . in my glove box the code says dh3 but that tells me nothing any body have any answers thanks .

 

Depending on if you have a switch NP273 or a lever NP271 respectively. Here is a link that will give you some information. http://www.newventuregear.com/tcases.html
Greg V.

 

not sure what the site is saying but I do have the electric shift,just looking for the proper fluid amount

 

Well it takes atf 4 I believe. Just fill till it's to the fill hole [top hole] . The case is aluminum so be careful tightening the plug.

 

Sorry got side tracked. On the rear end of the transfer case are 1 or 2 plates with model # type & stuff like that.