Greetings all;

I recently installed a Titan aftermarket fuel tank in place of my stock tank. The unit has been installed per manufacturers instructions. I really love the tank, but my fuel gage does not want to respond. I know the float is not rubbing the side of the tank. I pulled the tank back down and rechecked this. I ensured the venting is run correctly, and I am frustrated as the gage reads clear empty!! Do I have to have the system recalibrated by the dealer? Any advice is greatly appreciated.

Best Regards

Eric

 

Sounds like your sending unit gave up the ghost LOL. Check it with an Ohm meter and make sure it is working. I am not sure of the resistance it should show. Do a search, someone may already posted the readings.