Fast idle question
Thread Starter
Registered User
Joined: Feb 2004
Posts: 199
Likes: 0
From: TN
Fast idle question
I am swappin a 06 CR into a 06 F450 roll back and I need to figure out the fast idle for the pto.
Doing a search I found some info but not sure how to make it work on an engine only. I see guys talking about grounding the #22 pin on the ecm but there is no 22 on the C2 and on the C1 its the crank position sensor pin. So not sure what connector they ae talinking about with the pin 22.
Doing a search I found some info but not sure how to make it work on an engine only. I see guys talking about grounding the #22 pin on the ecm but there is no 22 on the C2 and on the C1 its the crank position sensor pin. So not sure what connector they ae talinking about with the pin 22.
Thread
Thread Starter
Forum
Replies
Last Post
EdmontonCanada
3rd Gen High Performance and Accessories (5.9L Only)
37
Dec 9, 2009 03:18 AM
Dale M
3rd Gen Engine and Drivetrain -> 2007 and up
3
Feb 10, 2009 09:43 PM
donhov
3rd Gen Engine and Drivetrain -> 2003-2007
12
Sep 23, 2005 10:40 PM
