Tom, I replied to your email.

here is my york write up I did many years ago for my bronco. Not the same, but the same process. This was early on and very basic, there are some improvements to be made to hoses/filters etc, but you get the idea of whats involved
http://www.wt4x4.net/tech/york.htm

here is a write up done by a buddy, also many years ago.
http://www.wt4x4.net/tech/broncoair.htm

there is one other in the tach section of my clubs site, but it uses a different compressor.
http://www.wt4x4.net/tech

 

Do you know if Kilby uses new or rebuilt compressors?

The one for the Dodge CDT is on sale for $1050.00, down from $1500.00.

Here is a write up I did on putting one on my Toyota 3.0 V-6.

http://www.pirate4x4.com/forum/showt...hlight=OOP%27S

 

Thanks Plug! I will check it all out and let you know what I came up with.

Tom

 

If you want ultimate air, here is the set up to get.

http://www.vmac.ca/index.php?underhood

I am going to be getting this for my rig, one of these days.

 

Those are a nice set-up, do you know what they cost?

 

I do not remember for sure, I want to say around 2k installed but it has been almost a year since I asked them so I might be wrong.

 

Many thanks again guys! So many choices here. Guess I have some homework to do!