Is driveline supposed to be straight from point A to point B
07-17-2009, 12:16 PM
#1
Registered User
Thread Starter
Join Date: May 2009
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Is driveline supposed to be straight from point A to point B
Is the deiveline supposed to be a straight line from transfercase output to rearend input? Mines not...if it is supposed to be straight then why is there a carrier bearing? See my signature to know what truck I'm reffering to.
07-17-2009, 04:53 PM
#2
Registered User
No it's not straight. I believe it is offset somewhat. What that accomplishes I'm not 100% sure but I read that it allows the needle bearings in the ujoints to rotate.
Thread
Thread Starter
Forum
Replies
Last Post
bngcustoms
3rd Gen Engine and Drivetrain -> 2003-2007
5
07-14-2009 05:14 PM
natlchamp2k4
Performance and Accessories 2nd gen only
10
12-06-2005 09:38 PM
silverbullet02
1st Gen. Ram - All Topics
5
10-01-2005 11:30 PM
yarddog
Performance and Accessories 2nd gen only
11
08-30-2005 09:01 PM
c5r
3rd Generation Ram - Non Drivetrain - All Years
25
03-10-2003 02:44 PM