Dead pedal with good TPS
Thread Starter
Registered User
Joined: Jun 2011
Posts: 86
Likes: 0
From: Colorado
Dead pedal with good TPS
I just finished converting a 2001 Super Duty to an 03 Cummins. I'm getting a dead pedal after TCC lockup and 4th gear is engaged. The engine seems to die and coast down below 40mph. During the coast the speed sensor is still functioning and TPS voltage continues to change with pedal input. WOT will take it right to redline at every shift point.
I'm running the 4R100 with the PCS controller. Smarty jr.was removed with no change.
Any suggestions would be very helpful. Thanks,
I'm running the 4R100 with the PCS controller. Smarty jr.was removed with no change.
Any suggestions would be very helpful. Thanks,
Thread
Thread Starter
Forum
Replies
Last Post
600 Megawatts
24 Valve Engine and Drivetrain
9
Mar 26, 2008 07:09 PM
HOdiesel80
24 Valve Engine and Drivetrain
39
Feb 1, 2007 02:06 PM
cmckinney
24 Valve Engine and Drivetrain
2
Aug 2, 2004 06:01 PM
