3rd Gen Engine and Drivetrain -> 2003-2007 5.9 liter Engine and drivetrain discussion only. PLEASE, NO HIGH PERFORMANCE DISCUSSION!

Anyone ever pull an '03 engine without dropping the tranny?

Old Sep 20, 2008 | 09:45 PM
  #1  
cLAYH's Avatar
Thread Starter
Registered User
 
Joined: Aug 2003
Posts: 2,021
Likes: 7
From: Cochrane Alberta
Anyone ever pull an '03 engine without dropping the tranny?

So I've got a '03 6spd 4x4 with a toasted motor. Want to pull it but I've been told the tranny needs to dropped to get enough clearance to tip it out.

Anyone figure out a way to do it with the tranny in?
Reply
Old Sep 20, 2008 | 09:51 PM
  #2  
06RAM2500's Avatar
Always a day late, and a dollar short.
 
Joined: Nov 2007
Posts: 1,926
Likes: 0
From: Baker, MT
Have to remove the ac condenser, intercooler, transmission cooler, and radiator. Then just pull the engine out the front of the truck.
Reply
Old Sep 20, 2008 | 10:25 PM
  #3  
cLAYH's Avatar
Thread Starter
Registered User
 
Joined: Aug 2003
Posts: 2,021
Likes: 7
From: Cochrane Alberta
Have you done this with a '03? Apperently with the large overhang on the cowl and the lack of room on the crossmember its not possible.
Reply
Old Sep 20, 2008 | 11:02 PM
  #4  
rich's Avatar
Registered User
 
Joined: Aug 2002
Posts: 3,308
Likes: 1
From: Kerrville eastern new mexico, west texas
the shop that worked on my 03 did it and put the 12v in but the hole front of the truck was gone
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
2500Ram
General Diesel Discussion
8
Nov 12, 2009 04:15 PM
JaimeG
3rd Gen High Performance and Accessories (5.9L Only)
2
Mar 26, 2009 06:58 AM
scout98
24 Valve Engine and Drivetrain
1
Jul 31, 2007 08:33 PM
dieselnewbie
Other
22
Sep 2, 2005 01:36 AM
Wes in TN
24 Valve Engine and Drivetrain
9
Aug 2, 2005 03:18 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:17 AM.