I have a 2003, I took it in for Emission test in Utah; It failed. "MIL Status ON"
I then turned the key 3 times too see I can pull some codes; No codes
I then took it to a Repair shop plugged in a Diagnostic tool , They could not pull any codes; nothing shown up, ABS or anything no codes at all.
They suggested I pull my 3 staged Edge EZ and retest it. and to call them.
I called Edge they said I should pull the Edge have it retested by the state,
I have not had it tested with the Edge pulled.

Please Help..
what are you thoughts; I am stuck, No Codes; state emission MIL status ON;

Chris

 

Do as they said and retest with the Edge disconnected.

 

I agree pull the edge, it alters the communication between data links.

 

I pulled the Edge, took it in for emissions it passed, thanks all for the help..

I think I will let it run for a week and plug it back in.

Chris

 

Glad to hear it Chris