Hi I went to BD Power to dyno my new truck , 2006 srw 4x4 auto with 7000miles on it , all stock except for quadzilla xzt , I did 3 pulls and the best # was

343hp@2550
706tq@2550

I'm happy

 

Eric, Decent #'s. What were your peak egts, boost, and did the tranny temp go high. ks

 

can't answer any of this , all my gauges are still in the boxes , I'll install them this weekend

 

Did you happen to dyno it stock too? without the Quad box?

 

Both #s peaked at 2550 rpm???? Doesn't sound right.

 

I wished I had dynoed this thing stock but I did not, I did three pulls and peak hp and torque #'s

1 run peak hp @ 2600rpm peak torque at 2400
2 run peak hp @ 2550 rpm torque @ 2500
3 run peak hp @ 2550 torque @ 2550


I have all those graphs , but since I'm computer dummy I dont know how to post them . I'll have to ask my wife to do this for me later on

One more thing BD Power uses Mustang dynamometer

 

Eric, We'd like to see the graphs. Those peaks are a little different that what we have seen. Get the gauges on and see what the temps are and let us know. Good luck. ks