3rd Gen Engine and Drivetrain -> 2003-2007 5.9 liter Engine and drivetrain discussion only. PLEASE, NO HIGH PERFORMANCE DISCUSSION!

not enganging 4wheeldrive

Old 04-18-2012, 10:47 AM
  #1  
Registered User
Thread Starter
 
doc winters's Avatar
 
Join Date: Jan 2011
Location: Twentynine Palms, Ca
Posts: 25
Likes: 0
Received 0 Likes on 0 Posts
not enganging 4wheeldrive

Lately my when i try and engange 4wheel drive the front end does not engage and i get a load clacking noise coming from underneath and sounds to be near or in the transfercase. i have new driveshafts on both ends and im dumbfounded on what it could be. please help!
Old 04-18-2012, 11:21 AM
  #2  
Registered User
 
firestorm's Avatar
 
Join Date: Apr 2003
Location: Orlando, Fl.
Posts: 626
Likes: 0
Received 0 Likes on 0 Posts
Check the linkage connecting the 4x4 shifter, to the transfer case. Mine lost the bushings at the transfer case, leaving it stuck in 4WD. Hope this helps.
Old 04-18-2012, 05:24 PM
  #3  
MTC
Registered User
 
MTC's Avatar
 
Join Date: Nov 2006
Posts: 808
Likes: 0
Received 0 Likes on 0 Posts
I had the same issue...as stated above, I readjusted the linkage and all is good.
Old 04-19-2012, 03:01 PM
  #4  
Registered User
 
papaduck's Avatar
 
Join Date: Mar 2003
Location: NW Arkansas
Posts: 783
Likes: 0
Received 0 Likes on 0 Posts
If it does go into gear by observing from underneath, then it could be a stretched chain in the transfer case.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Diesel-Dan
12 Valve Engine and Drivetrain
20
09-22-2019 09:34 PM
04ctd
3rd Generation Ram - Non Drivetrain - All Years
9
03-08-2006 11:22 AM
Scotty
General Diesel Discussion
11
09-11-2005 12:37 AM
NHDiesel
2nd Gen. Dodge Ram - No Drivetrain
3
09-02-2005 11:23 AM
Copenhagenjunkie
24 Valve Engine and Drivetrain
2
12-27-2002 05:45 PM


Thread Tools
Search this Thread
Quick Reply: not enganging 4wheeldrive



All times are GMT -5. The time now is 08:58 PM.