torque covertors
05-29-2010, 10:41 PM
#1
Registered User
Thread Starter
Join Date: Jul 2006
Location: Michigan
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
torque covertors
my father-in-law has a 97 dodge and wants to upgrade his torque convertor and wants to know about the BD torque convertor. Does anyone have any input on this. Personally I would get the Gorend but want to get other opinions.
06-02-2010, 09:22 AM
#2
Registered User
Either has a decent TC. Goerend is probably cheaper though. Don't be too worried about the triple-disk mess. While they do offer a little more holding power, turning up the line pressure can do the same thing. I have a single disk DTT in my 99, and have turned 12's in it.
He might like it a little tighter than stock though. Ask your provider what your options are in that area. The TC in my 96 is so tight the truck will do 27mph at an idle on flat road, and back my 8K GN at an idle.
Chris
He might like it a little tighter than stock though. Ask your provider what your options are in that area. The TC in my 96 is so tight the truck will do 27mph at an idle on flat road, and back my 8K GN at an idle.
Chris
Thread
Thread Starter
Forum
Replies
Last Post
mitm
24 Valve Engine and Drivetrain
4
08-16-2009 09:29 PM
Firstgenfanatic
1st Gen. Ram - All Topics
11
05-14-2008 06:17 PM
PapaSmurf
3rd Gen High Performance and Accessories (5.9L Only)
3
12-19-2003 02:14 PM
Davidp
Performance and Accessories 2nd gen only
1
02-01-2003 05:49 AM