OK, here's the scoop. After replacing the entire front end steering componentry on my truck and installing a Thuren trac bar and 2' leveling kit I got a minor clunk in the steering when I backed up or turned a slight corner at low speeds. We put a reversed angle pitman arm on the truck from a tough country lift kit, which got everything (tie rods and steering rod) back to a flatter angle and the clunking is gone. I was fearing a steering box or control arm rebuild at that point because we have replaced everything else. This was pretty cheap to fix at $80.00 US. Yeehaaw....for now. Kurt

 

Im having the same problem got a 2in lc and thuren tb Ive replaced alot of things including controll arm bushings. you got a part number for the pitman arm.

 

I'll call Monday a.m. for it. There is no drop, its just bored to recieve the tie rod shaft from underneath rather than the top. KM