i was at the local dodge truck junk yard today and came across a leather prower seat and i asked the man how much and he said $250 for the front and$ 150 for the back is this a good price and how hard would the swap be?? thank ya guys in advance john

 

As long as you get the right years/tracks you should be ok...

If you have QC or reg cab there is a difference, other than that 94-02(?) should all be the same...
You might not have the power hookup if they are power or heated, etc...(but its not hard, 12v source)
Another thing might be belt mounted on pillar vs. seat...
As for the price, theyre probably worth it if theyre in good shape...

I paid $150 for a 40/20/40 split bench for my reg cab(that needed to be recovered, I just needed them for the tracks)

 

Leather seat COVER retails out at around $800.00 (that's ONE front cover w/t heat).....and that is IF they are still available. (I know some 01's are discontinued).

 

There is a set of electric seat tracks in classified right now. (not mine)

 

thanks guys my main concern was the price right they seem to be in good shape no tears very little wear i didnt think to look at the trucks milage but the big thing is how hard would it be to run the power without it looking like a chop shop did it?

 

There is a pop out in the floor for the wires so no problem coming through.